99hub.-in,7. What are the notices for hydraulic oil cooling?
a.When machine is working, the oil temperature is about 40℃, if temperature is too high, oil viscosity will decrease, the result is oil seals fast ageing. When oil temperature is over 60℃ or oil level is lower than oil inlet pipe, motor will stop automatically, there will have error message. There is oil cooler on HISSON injection molding machine.,tennis-bracelet-jtv
b.Cooling water pipe will connect with oil cooler, cooling water temperature should be lower than 30℃. Cooling water sources are normally cooling tower or water chiller.,soccer-formation-generator